Massoth 8222100 eMotion S Diesel Universal Decoder
close	Item: 8222100 Price: $165.99 plus shipping Inventory: This item is no longer available
	This item is no longer available.
eMotion S Diesel Universal decoder by Massoth The Massoth eMOTION S sound decoder is small in size but big on features. It has the same sound features as the Massoth XLS sound decoder. eMotion S Sound Decoder The S decoder features 3 output functions, 3 contact inputs, and a 3 watts integrated high-performance sound amplifier, with 6 independent sound channels. Especially designed for analog operation, and for locomotives with existing decoders, it suitable for either DC (analog) or DCC(digital )operation, and capable of detecting the operating mode automatically. All sound features of the S decoder are available at the lowest possible voltage; a stabilized analog operation is guaranteed at 5 Volts. The decoder holds a little over 3 minutes of high quality digital sound. It stores a locomotive's prototypical operating sounds as well as an array of additional sounds that may be configured to suit individual tastes. The decoder's full-fledged digital power amplifier reproduces all sounds and side noises of a locomotive authentically. The eMOTION S sound decoder supports the full NMRA protocol, and is compatible with all generations of the LGB® MTS system. The S decoder fits readily into and is suitable for any G-scale locomotive including those manufactured by Aristocraft, Accucraft, Bachmann, KISS, LGB, and USA-Trains. Summary of Features: Serial and parallel control of all lights and function outputs, including LGB® P-sound updates Digital and analog operation with automatic recognition Compatible with NMRA DCC and all generations of LGB® MTS systems 3 function outputs, 1 x 50mAmps(A3), 2 X 10mAmps (A7-A8) Connection for optional power buffer Connection for programmable pulse generation function 2 Reed contact inputs RC servo control channel Massoth-SUSI interface Easy to use function mapping Free command allocation of all function outputs (F1-F16) Rest function for all CV values Overload protection for function outputs Overheat protection for function outputs 3 watts hi-performance amplifier for 8 Ohms speaker 6 channel play-back (6 sounds at the same time) Memory capacity for max. 200 sec. of recorded sound 4 driving sounds, and 12 side noises, selectable play-back frequency: 16KHz Volume control by potentiometer or CV programming (also individual sounds) Sound functions usable in analogue mode Sounds and firmware updatable Features for Mallets, Rack Rail locomotives, and Dual Powered Locomotives: (1) The S Decoder has 2 separate inputs for synchronizing chuffs to wheel rotation in locomotives with two steam pistons like Mallets or steam rack rail Locomotives. (2) Starting with version 2.5, you can use CV 170 to define a function key which, when pressed, will activate/deactivate the rack noise on a steam rack rail engine, or switch the sound from electric to diesel and vice versa on a dual powered locomotive. Technical specifications Power supply: 0-24 Volts DC/DCC Current: 30-300mAmps (depending on sound, without functions) Maximum function current: 70mAmps (50mAmps[A3], 2x10mAmps[A7-A8]) Loudspeaker 8 Ohms (Min. 1.5 watts) Temperature Range: -4°F to 113°F Dimensions: 35x20x12mm Scope of Supply eMOTION S Decoder SUSI interface cable Double-sided Tape User's Manual