Your Cart (0)
Thumbnail Filmstrip of Massoth 8131901 DiMAX Transmitter 2.4GHz Images
Massoth 8131901 DiMAX Transmitter 2.4GHz
With this retrofittable radio transmitter, all Navigators currently on
the market can be equipped with the latest 2.4GHz technology. This makes
sure that the controller will always be up to date in the future. The
2.4GHz radio transmitter requires at least the Navigator firmware
version 2.2.
Note from Massoth regarding the process to update your 2.4GHz
components to version 2.0. Please work through the individual points of the guide one after the other.
components to version 2.0. Please work through the individual points of the guide one after the other.
1. General
The update of the DiMAX radio receiver 2.4GHz (8131001) and the DiMAX radio transmitter
2.4GHz (8131901, installed in the DiMAX Navigator) can be installed via the DiMAX Central
Station or via the DiMAX PC module. This is always done via the bus cable.
The update of the DiMAX radio receiver 2.4GHz (8131001) and the DiMAX radio transmitter
2.4GHz (8131901, installed in the DiMAX Navigator) can be installed via the DiMAX Central
Station or via the DiMAX PC module. This is always done via the bus cable.
2. Massoth Service Tool
Make sure you have the latest version of the Massoth Service Tool on your computer. Perform
an update and download the latest firmware for the following components:
1. 8175201 DiMAX PC Module – Version 4.0 (also compatible with 8175101)
2. 8134x01 DiMAX Navigator – Version 2.20
3. 8131001 DiMAX Receiver 2.4GHz – Version 2.0
(Two update types are available, Type „A“ and Type „B“)
4. 8131901 DiMAX Transmitter 2.4GHz – Version 2.0
(Two update types are available, Type „A“ and Type „B“)
Make sure you have the latest version of the Massoth Service Tool on your computer. Perform
an update and download the latest firmware for the following components:
1. 8175201 DiMAX PC Module – Version 4.0 (also compatible with 8175101)
2. 8134x01 DiMAX Navigator – Version 2.20
3. 8131001 DiMAX Receiver 2.4GHz – Version 2.0
(Two update types are available, Type „A“ and Type „B“)
4. 8131901 DiMAX Transmitter 2.4GHz – Version 2.0
(Two update types are available, Type „A“ and Type „B“)
3. Update mit DiMAX Digitalzentrale (8136501, 8136001, 8135001)
If you want to perform the updates with your DiMAX digital command station, this is possible
without further requirements via the USB interface or the serial interface. Make sure that the
control unit is connected to the PC and that the Massoth Service Tool (MST) is up to date. Then
continue with point 5: Update DiMAX Receiver 2.4GHz (8131001).
If you want to perform the updates with your DiMAX digital command station, this is possible
without further requirements via the USB interface or the serial interface. Make sure that the
control unit is connected to the PC and that the Massoth Service Tool (MST) is up to date. Then
continue with point 5: Update DiMAX Receiver 2.4GHz (8131001).
4. Update with DiMAX PC Modul USB (8175201, 8175101)
If you want to install the updates via your PC Module, a firmware version 4.0 is required. Please
perform a firmware update of your PC module to the latest version. Then continue with point 5:
Update Receiver 2.4GHz (8131001). From version 4.0 on, both the Navigator and the
Transmitter can be updated directly with the PC Module. The DiMAX PC Module 8175001 with
serial interface is not suitable.
If you want to install the updates via your PC Module, a firmware version 4.0 is required. Please
perform a firmware update of your PC module to the latest version. Then continue with point 5:
Update Receiver 2.4GHz (8131001). From version 4.0 on, both the Navigator and the
Transmitter can be updated directly with the PC Module. The DiMAX PC Module 8175001 with
serial interface is not suitable.
5. Update DiMAX Funkempfänger 2.4GHz (8131001)
No 2.4GHz radio components may be switched on during the update of 2.4GHz components.
Since two types of radio chips are used, two different firmware updates are available for the
Receiver. For the sake of simplicity, try to install the update type A. If you receive an error
message, install the update type B. Alternatively, you can check the inscription of the radio chip
(last two digits 00 or 01). The last two digits of the chip label "-00" correspond to type A, "-01"
correspond to type B. After a successful update, put the radio receiver aside and do not connect
it.
No 2.4GHz radio components may be switched on during the update of 2.4GHz components.
Since two types of radio chips are used, two different firmware updates are available for the
Receiver. For the sake of simplicity, try to install the update type A. If you receive an error
message, install the update type B. Alternatively, you can check the inscription of the radio chip
(last two digits 00 or 01). The last two digits of the chip label "-00" correspond to type A, "-01"
correspond to type B. After a successful update, put the radio receiver aside and do not connect
it.
6. Update DiMAX Navigator
To update the 2.4GHz radio transmitter in the Navigator, the hand controller requires firmware
version 2.20. Ideally, all hand controllers should be updated to version 2.20, regardless of
whether they are equipped with 2.4GHz radio transmitters or not. All variants of the Navigator
can be updated to version 2.20. Locomotives stored in the hand controller will not be deleted
To update the 2.4GHz radio transmitter in the Navigator, the hand controller requires firmware
version 2.20. Ideally, all hand controllers should be updated to version 2.20, regardless of
whether they are equipped with 2.4GHz radio transmitters or not. All variants of the Navigator
can be updated to version 2.20. Locomotives stored in the hand controller will not be deleted